striped accent wall: a tutorial! // diy

Today I'm going to show you how to go from this:

To this:

We are 100% in love. This was a somewhat spur-of-the-moment project and we are so thrilled with how it turned out. The diagonal stripes were Tim's idea; what do you think? I wasn't so sure at first, but as soon as we started painting, I was thrilled we went with his choice. Go Tim!
The darker color was a lovely bluish-gray Behr paint+primer-in-one that we found in the mis-tint section at Home Depot for... wait for it.... SEVEN DOLLARS (for a gallon!!!). I don't know how familiar you are with paint prices, but that's a good 80% off it's normal price. Moral of the story: check the mis-tint section first.
The lighter color was just our darker color mixed with some white paint we had in the garage (it was the same finish). We really wanted a tone-on-tone color pattern, and since a) we didn't want to buy more paint and b) our first color was a botched custom color anyway, we just mixed our own. The ratio ended up being about 2 parts dark to 1 part white, maybe? We kind of played with it until we liked it, then of course painted a test board to make sure it was the contrast we wanted.

We wanted the stripes at a 45 degree angle across the wall, and we wanted them to be about six inches wide.  So, we marked every six inches across the floor and one side wall, then used some basic geometry (Remember that? Huh? huh? Yeah, Tim didn't either.  he was no help) to get the ceiling and other wall marked. It's not as hard as it sounds, I just stink at explaining. Basically, some of the stripes ended in the middle of the corner, and we had to figure out where the other edge would go.

To get a perfectly straight line between the marks, we used a "snap line" as a guide. They sell them in the hardware store, but pssh on that! We used a piece of yarn we had covered with chalk (we literally colored along the yarn, it worked great), stretched it across the wall from one marked point to the other, pulled it taut, and gave it a SNAP!

From there, it was just a matter of taping off the stripes and painting! We taped off the outside of the stripes we wanted to paint, and then figured out our painting technique.

I haven't done a TON of painting in my life, but I've done enough to know that using painter's tape doesn't always guarantee a perfectly crisp line. This of course was a bummer when a crisp line was exactly what we wanted! I tried a couple techniques, but settled on one I first saw on House of Hepworths, which worked really well on our test board:
The lighting in that photo is pretty off (Left and Right photos should be same colors), but it's pretty clear that painting the base color on top of the tape before painting the stripe color really made for a crisp line. Any "bleeding" done under the tape was the base color, which then blocks the accent color from bleeding at all!

So, even though it meant extra drying time, we made sure to paint over the edges of the tape with our base color before we added in the accent color.

After that coat was fully dried, we painted in our accent stripe color. We pulled the tape off when the paint was still a little bit wet, and had no trouble with the removal.

Can I just say that there's nothing more satisfying than pulling off painters tape and seeing exactly what you wanted to see? The most beautiful thing in the world.

We are absolutely in love with our silly little wall. It just perks me right up coming home from a rough day at work (this is one of the MAIN benefits of a pretty accent wall, don'tcha know?).

We finished it off with some $5 over-the-door mirrors from Target, rearranged the furniture a bit, and and of course you can see our "new" chandelier! Just a couple little tweaks made the room look SO different, and we actually like spending time here.
What do you think?

Shared at Not Just A Housewife, Sugar Bee Crafts, Krafty Kat

Distressed Dining Room Table

Folks, as I have said before, most of the furniture we own has been "preloved". Some of it has lived with several families before it came to be with us!

One of those things was our ancient dining room table, a decrepit bistro table that's older than I am. When I got splinters from it for the bazillionth time, we dragged it upstairs to our patio and ate on the coffee table until we could figure out what we were going to do (Dining room tables, as you know, don't come cheap).

Then it hit us. Why couldn't we MAKE one?

Source

We {very loosely} followed The Lettered Cottage's tutorial, and couldn't have been happier with the results: 

That runner was an Post-Christmas-Sale score from World Market. Love that store :) We made the centerpiece with some scrap wood and leftover table stain. 

Anyway. This was a kind of spur of the moment DIY; we saw the table on the side of the road on our way out of town and fought a few locals for it... We saw potential in it right away:

Scratches, pockmarks, and holes, oh my!

It had lived with a bunch of college students, and looked like it had been used as a cutting board...? Not sure what that was all about. Also there were only three chairs. BUT since the price was right, we figured we had nothing to lose.

We stripped it with stripping goop (the technical name for it, of course), which totally didn't work at ALL, so we had to sand the WHOLE DANG THING DOWN by hand. Reason #1 that this project took so long.

Before we took the legs off to sand them, too... 

Seriously we spent like a month getting this all back to a paintable surface. Sheesh. 

This was the first place where we deviated from the tutorial we were following. Since our table was a really light-colored wood (pine, maybe?), we didn't think that the whitewash effect would be as dramatic as we wanted. So, we made another trip to the hardware store and picked up a tube of this bad boy:

This stuff was so great, because we could just squirt it onto the table or on a paper towel and just rub it until we got the effect we wanted. Both seemed to work well, although personally I thought putting it on the towel gave me a little more control with the color. This was what it looked like after one coat:

The parts that were really damaged soaked in LOTS more of the stain than the rest of the table, but it gave the whole piece a distressed look that we absolutely loved.

Since we would be whitewashing over the stain, we wanted the dark color to really punch through, so we gave it a second coat once the stain had completely dried. If you don't wait until it dries, you start to wipe the first coat off a little bit.

MUCH better. We had refined our technique by then, as you can see, and the application was a lot more even the second time around.

I wish I had been smart enough to snap a picture of the whitewashing process, but we had to do it fast since the mixture dried so quickly.  I've heard that whitewash should be fifty-fifty water and paint (WATER-BASED!!!), but it wasn't as thin as we wanted, so we ended up using a two-part water to one-part paint ratio. We actually mixed it in a pyrex measuring cup: poured in a third cup of paint and then filled with water until we had a cup, making sure to mix it really well. That would have been enough for three or four tables, so keep that in mind ;)

We did two quick coats of whitewash, making sure to apply it evenly but thinly enough to allow the stain to peek through.  Here it is after the final application.

We just painted the legs with unmixed paint (i.e. not whitewash) since we didn't think it mattered all that much, and we really didn't want to have to stain those suckers. They were a pain to sand, and staining them would have made me cry in frustration ;)

By the time we had finished whitewashing the table, we had been working on the project ENTIRELY too long, so the last thing we wanted to do was seal the dang thing. So we cheated and only sealed the top, using an aerosol:

Since it wasn't polyurethane, we knew it wouldn't yellow over time, and so far it has proven pretty durable (it's been five months so far, and no rings!) 

I love it.

Have you ever done a DIY spur of the moment? How did it turn out?

Pin It